General Features : 

UL&CSA GRADE
Rate temperature : 105°C
Rate voltage : 300V
Flame test : VW-1

CSA standard : C22.2 No.210.2
Rate temperature : 105°C
Rate voltage : 300V
Flame test : FT1, FT2

• INSULATION:

Material of insulation : polyvinyl chloride(PVC)gray
Insulation thickness average : 9 mil.
Minimum insulation thickness : 7 mil.

• PHYSICAL PROPERTIES:

After 7 days air oven at 136°C
Average tensile strength : 1500Ibs/inch²
Percent of original : 70% at least
Average elongation : 200%
Percent of original : 65% at least

* Custom Length Are Available Upon Request

• CONDUCTOR: Solid

AWG size : 24AWG
Number of strands in each conductor : 7/0.203mm.
Lay of strands in each conductor : 0.7 inch at least
Cross section area :404mil

• ELECTRONIC CHARACTERISTICS:

Spark test : 2500V
Dielectric strength test : Minimum 2KV in 1 minute
Conductor Maximum : Maximum 93/km
Insulation resistance : Minimum100M-km
Capacity : 31pF/m
Inductance : 1.45uH/m
Impedance : 80
Propagation delay time : 4.2ns/m

• CONSTRUCTION DRAWING:

• USAGE:

Solid : Used for most electronic equipment requiring higher currents such as jumper wires or short-distance connections.
Stranded : Used for most electronic equipment requiring a higher rated current due to long-distance connection.
This type of cable may be used with connectors of pitch 2.54.

• CONSTRUCTION TABLE

• SAMPLE