General Features:

UL&CSA GRADE
Rate temperature: 105°C
Rate voltage: 300V
Flame test: VW-1

CSA standard : C22.2 No.210.2
Rate temperature: 105°C
Rate voltage: 300V
Flame test: FT1, FT2

• INSULATION:

Material of insulation: polyvinyl chloride(PVC)gray
Insulation thickness average: 9 mil.
Minimum insulation thickness: 7 mil.

• PHYSICAL PROPERTIES:

After 7 days air oven at 136°C
Average tensile strength : 1500Ibs/inch
Percent of original : 70% at least
Average elongation : 200%
Percent of original : 65% at least

* Custom Length Are Available Upon Request

• CONDUCTOR: Solid

AWG size: 26AWG
Number of strands in each conductor : 7/0.16mm.
Lay of strands in each conductor : 0.6inch at least
Cross section area :253mil

• ELECTRONIC CHARACTERISTICS:

Spark test: 2500V
Dielectric strength test: Minimum 2KV in 1 minute
Conductor Maximum: Maximum 148/km
Insulation resistance: Minimum100M-km
Capacity: 24pF/m
Inductance: 1.4uH/m
Impedance: 90
Propagation delay time: 4.2ns/m

• CONSTRUCTION DRAWING:

• USAGE:

Solid: Used for most electronic equipment requiring higher currents such as jumper wires or short-distance connections.

• CONSTRUCTION TABLE

• SAMPLE